I’ve long been a fan of flat pedals when riding. Over the years, I’ve ridden in running shoes, work boots, skate shoes and finally going bike specific a few years ago, Five Tens for a long time. Back in June, I needed a new set of shoes and wanted to try something new. I also wanted something understated and basically black, which proved quite hard to find; there is a lot of lairy kit out there at the moment!
However, after a bit of searching, I stumbled across the Adidas Terrex Trailcross range, and the hi-top ‘protect’ version caught my eye immediately. All black, save for a few striking white lines, there’s no question that these shoes look the absolute business.
Let’s start with construction and materials. The high-top features the ever-reliable stealth rubber sole found on Five Ten shoes (who are part of the Adidas group), D3O ankle protection, ripstop upper, a simple yet effective lace bungee and Ortholite midsoles, ensuring all day comfort.
For those that don’t like the high-top feel of a riding shoe, there’s a low top SL version available which has pretty much the same features.
The look and feel of the Trailcross shoes is, as you’d expect from Adidas, exceptional. Lightweight (the ‘460’ on the ankle is the actual weight per shoe – mine are a UK 9.5 and this is spot on within sizing being true) and comfortable to slip your foot into, they’ve thought of some important factors for a mountain biker. You put a huge amount of pressure through your legs when riding, so Adidas have gone with their Ortholite midsole which really does provide some incredible support when riding. I’ve had some long and dirty days on the bike and not once have my feet felt sore, which has happened in the past with other shoes.
Another great thing they’ve thought of is that we move our feet around when riding and occasionally ankles meet metal. So, a useful D3O pad placed on the Velcro strap of each shoe is a welcome addition and has absolutely saved me some hits over the past 5 months. There’s also a reinforced heel and a little bit of protection for your toes.
My favourite little touch is the lace bungee. I’m absolutely in love with this feature. All too many times in the past have I been riding and laces come loose and flail towards the drivetrain. This, as I’m sure you know, can result in bad things happening and can also interrupt a great ride if you’re in the zone. Not once has this failed me and I’m very happy for this.
The sole isn’t quite a sticky as my Five Ten Freeriders, but I’m quite happy with this as sometimes I felt almost clipped in when paired with my DMR Vaults. However, with the Trailcross shoes, whilst incredibly grippy, there is a little room for movement, meaning you can angle your feet to mimic the direction and flow of the trail. They’ve found the Goldilocks equivalent of sole stiffness too; not too hard, not too soft, just perfect.
Another side note of the sole (and the shoes as a whole) is that they can double as trail walking shoes. I tried this with a hike around Lands End and the Cornish Coastal Path recently and they held up perfectly. The sole has angled lugs which really do grip into both walking paths and when hiking back up to the top of a trail with the bike.
Whilst the Trailcross may look waterproof, they’re sadly not, but that’s why Sealskinz exist. They do repel a lot of water though and also dry extremely quickly, which I found out with a recent trip to Bikepark Wales.. mud, slop and water and my feet still felt relatively dry by the end of the day.
From racing to big trail centres, local rides to hiking, I’ve honestly given these shoes some abuse over the past few months and have only had to chuck them in the wash once to get them back to new. Usually a quick brush down is sufficient to get them looking great again. Even after some hideous treatment, the Trailcross shoes still look like new.
These are genuinely the comfiest shoes I’ve ever ridden with, so I find it strange that I’ve not seen another set being worn on the trails yet! Light, protective and next-generation comfort all at a great price (mine were from Germany so I paid in €, but you can get them for around £100), these should one hundred percent be a consideration for your next trail shoe.
My only grumble with the Adidas Trailcross Protect shoes is that I don’t have a second pair; they’re that good.
I mean, just look it at. Now look at it some more because on January 15th 2018, Hope announced that they’re reducing the price of this beauty by a whopping £2000! What was £7500 has become £5500, which now brings the HB160 into the territory of affordability for a much wider range of mountain bikers and comparatively on par price-wise with some other major players offering a similar spec bike. What’s great too, is that Hope are refunding anybody that paid full price. What legends!
Hope are known for making some beautiful components, that’s widely known and accepted. For their first foray into building a frame, they’ve done it again; the HB160 is truly a jaw-dropping work of art that wouldn’t look out of place if it was hung on a wall of a billionaire’s summer mansion in the Hamptons. The sheer time and effort that has gone into making this bike a reality is difficult to comprehend, but some things are most definitely worth the wait and my word have Hope delivered the goods. This post is going to be picture heavy and for damn good reason.
There’s no doubt this bike is visually stunning, so the question on a lot of people’s minds is, how does it ride? As Hope are only producing 500 bikes per year and with a price tag of £5500 (was £7500), this boutique beauty is still out of reach for a large percentage of cyclists, myself included, but the price drop of £2000 does make it more realistically attainable if you have the funds and absolutely puts the HB160 as a contender if you’re in the market for a new bike and are eyeing up the likes of carbon models from Santa Cruz, Evil and Transition, to name a few.
Whilst it’s still out of my budget, I have some very kind friends at Nirvana Cycles in Westcott who just happen to have a demo bike with the even more exclusive ‘factory green’ colourway, and they asked if I’d like to tag along on one of their shop rides and try out the HB160… naturally I was like a puppy raised on cocaine and kibble and jumped at the chance.
So let’s take a look at the bike I’d be riding:
Frame: HB160 Carbon, 160mm travel, Horst link suspension platform
Drivetrain: Hope cranks, Hope cassette, SRAM XX1 shifter and mech
Brakes: Hope Tech 3 E4, 180/180mm
Components: Hope Carbon bar 780mm, Hope AM 35mm stem, Hope lock-on grips, SDG Duster Ti saddle, RockShox Reverb seatpost and lever
You can check out behind the scenes video from the Barnoldswick based team here:
As Hope have the benefit of using their components on the bike, they have created some of their own ‘standards’; a 130mm rear hub spacing (‘anti-boost’, if you will) which still gives insane strength, a 17mm rear axle and a unique bottom bracket setup are just a few ‘non-conformist’ additions. However, you can rest assured that, should you break anything or need a replacement, Hope will be able to sort it.
The HB160 was waiting for me on arrival on a sunny Saturday morning and I met with shop owner Simon and buddy Neil and I got the bike set up; a little extra pressure in the forks and shock and it was ready to roll on a shop ride with some great people around the Leith Hill area of the Surrey Hills. I’ve never really ridden this area, as I’ve always stuck more to the Peaslake side historically. After the ride I did, I am absolutely going to explore that area more, it’s brilliant and has a huge variety of trails from Whistler style tech to road gaps, massive drops and monster senders.
PG going HUGE on a road gap.
I tested a large and, at 6’1”, the bike felt a little more compact that I’d have expected, positioning me a bit more over the front wheel than I was used to. However, the HB160 is a bike that was designed to tackle the climbs and long days in the saddle just as much as the descents. Hell, it’s a British bike and we don’t really do uplifts as much as the rest, so I’m sure Hope had this in mind during the design process.
I was out with a great group; Simon, the shop owner was leading the way and buddy and team rider Phil was on fire as always, sending anything in his path (and taking some great photos). I also met some great people, amongst others: Will (who had the gnarliest crash I’ve seen for a long time, which he thankfully came out of with minor scrapes), Kate, a hella fast shredder with the best shorts I’ve ever seen and Miles, a friend of another team rider Charlie and a rapid little dude!
We did a roughly 10 mile loop taking in just under 2000ft, across various terrain, so I felt I got a great test of the HB160 in a short space of time.
The climbs were a cinch, the only time I had to put a foot down was due to my shocking line choice over some roots. Otherwise, it would climb like a true mountain goat thanks to the supremely crisp shifting of the Hope cassette and SRAM XX1 shifter working in perfect harmony.
Descending technical singletrack is, in my mind, where the HB160 truly came alive. The grip the bike delivered was astounding. Where I’d usually pick a line carefully through roots, the HB160 genuinely drifted over the top of everything, as if it was dancing on water; the combination of wide tyres with low pressure, a responsive back end and the geometry positioning me perfectly all came together to produce the most grip I’ve experienced when riding, and I genuinely mean it when I say that.
General riding of the HB160 was great fun too. It felt reliable, trustworthy and above all, energetic. I found the HB160 was easy to get on the back wheel and hop over little features on a trail.
We rode some decent sized jumps and drops and the HB160 swallowed them whole, with the Fox shocks absorbing everything with no question, one or two times the plush 160mm of travel compensating for a few simple, sloppy mistakes. Twisting and turning through the trees on loam dusted trails, the HB160 felt like a jacked-up Honey Badger; compact, rowdy and full of rage just waiting to be unleashed. Small bumps turned into an excuse to get the bike airborne and any slight angle in the trail had me flicking the back end out in search for hero dirt.
One small thing I was particularly impressed with were the Hope grips. The black colour almost became transparent and whilst they looked thin to begin with, they felt supremely comfortable and the knurled construction together with the slight ridge on the outer end of the grip ensured my hands felt perfectly placed throughout the ride.
However, the main thing that had me in awe all day was just how refined the bike was. From the carbon weave glistening when hit by a beam of light through the trees, to the meticulous machining on the swingarm, the design of the bike has been thought through in an almost incomprehensible way. The curves on the frame are glorious and every detail has been covered; it truly is a masterpiece of design.
The handling of the bike just increases the ‘wow’ factor of the HB160 too. Snappy, sharp and ultra-responsive, it was an absolute joy to ride and I’m hugely thankful to Nirvana cycles (Neil in particular for organising it) for allowing me to ride this beast of a bike. The shop rides are superb fun with a great vibe and shop owner Simon took the time to offer some great advice to some of the newer riders which was great to see. Even better, the ride ends with a curry back at the shop; a great way to get your energy back for the day ahead!
I only experienced a couple of downsides with the HB160 during my ride; firstly, the Reverb was very slow at returning to its extended position, even after fettling with the speed. Secondly, as I felt a bit more compact on the bike than I was used to, I would have loved a little extra width in the bars. An 800mm bar rather than a 780mm would have been preferable, but both of these are easily rectified, so neither would be a show stopper when considering a purchase.
I actually struggled to write this review as it’s hard to convey how impressive the HB160 was in words. It’s perhaps because I felt a bit humbled riding this bike; if I’m honest, it was almost like letting a gibbon drive a Formula One car.
The HB160 is an exceptional bike, made by the best. It’s no surprise that it comes at a premium, but then you’d not expect to pay peanuts for a McLaren or an Aston Martin, would you? If you’re lucky enough to have the budget for this one, you simply must test one and you cannot go wrong with a shop ride with Nirvana Cycles to put it through its paces.
I’m off to put one of my kidneys on eBay, I’ll catch you soon.
Howdy y’all. So I’ve got a ton of great stuff to write up about and bring to you, including some rad demos of bikes, some cool edits and some great trail reports. However, I’ve also been working on something else. Something big. Something that’s taking up a huge amount of time, but I’m confident it’ll be worth it in the end. It’s time to share a little bit about that, as I’ve been super slack with posts lately!
Firstly, the look of Stealth Riders. That lovely image you’ve seen above is one of the awesome new logos, which I’m super stoked about. I’ve got a fair few different designs in the works, which will come into play soon… I’ll reveal more on that when I can. Huge thanks to the designer and good mate @_jamjams. He usually creates unbelievably good geometric artwork of R&B, Hip Hop and Sports stars, which are well worth a look at! I’ll be hanging a commission in the mancave soon. Here’s a look at some of the range, I’d love to know your thoughts.
The new logos are (in my absolutely non-biased opinion), epic! What I love is that the mountains are made from the ‘S’ and the ‘R’, so it just ties in nicely and looks smooth, sleek and stylish. The original logo has been around for over a year now and it’s time to evolve. Along with the new logos, I’m also redesigning the website from the ground up. I’m switching platforms, refining the content and making it more user friendly for everybody (hopefully myself included!).
Excitingly, I’m also looking to offer some dope merch, so you can help represent Stealth Riders when out on the trail on having that post-ride pint. It’s early days, but I’ve been working on some designs and I’m nearly happy with some of them! I want to make things perfect, as that’s what you, fellow Stealth Rider, deserves. There are by no means final designs, but hell, you deserve a look at early concepts:
The current logo will still be in play for a few weeks at least whilst I finalise the new website and merch, so it’s just a teaser of what’s coming for now!
Anyway, it’s just a short post to let you know I’m still here, busy in the background, working away to make things look insane. As the weather has been so nice too, I’ve also been out on the bike in a big way. Whenever I’m not staring at a screen, I’m out on the bike with some top people, progressing at a crazy pace. Here’s a little edit of a recent local ride to show some radness including a sick 360 from Tito:
I’ve also been scoping my local trails a lot more lately, trying to learn the fastest lines to be able to keep up with the Fleet MTB mob. There’s some quick lads for sure, all of whom are absolute legends, so there’s always some superb banter. If you look for #bantacrew on Instagram, you’ll see some of their posts.
Evening rides have been stunning lately, with roasting weather and beautiful views, along with cows hogging the ultra loamy trails.
So now you know what’s going on… loads of exciting shizz, basically! I can’t wait to share the new stuff with you as it all happens. I best get back to slaving over the new website! Until then…. STAY STOKED. STAY STEALTH.
Swinley Forest is home to some great trails and the team at Swinley Bike Hub arrange some incredible events too. The #Swinduro, the recent Fox Proframe demo day, regular night rides and BBQ’s, to name a few. From May 5-7, it was no different and I got to channel my inner Gwin… YT Industries had come to town on their ‘Rolling Circus’ tour; a global showcase of the YT demo fleet of Jeffsys, Capras and the Tues.
Of the 10 European stops, 3 were in the UK and I was stoked when I heard one of the venues was Swinley. I booked the day off work immediately with the intention of rocking up and trying all 4 models on the day.
The 5th came around and due to an X-Ray appointment in the morning, I didn’t arrive at Swinley until around 10.30. Boo. By this time, the queue was pretty beastly due to the huge demand of trying out the models from the direct sell German brand, so I chatted with a few of the crowd and then went for a ride on some other bikes in the hope the queue would die down.
Sadly, although the queues did quieten down in the afternoon, I didn’t get the chance to try either of the Jeffsys or the Capra which was a shame, but the vibe on the day was superb; chilled beats, smiling riders, an ever tasty BBQ and the hub had some great products on sale from Fox and Dakine (two of my favourite riding brands), so I was kept entertained even when off the bike.
If you know Swinley, you’ll know that, whilst a brilliant trail centre with something to cater for everyone, a downhill venue it is not. That meant the 2016 UCI World Cup winning Tues was not in as high demand as the trail and enduro bikes. So, Swinley team rider Michael Wilson and I had a chat and before we knew it, we were picking up some jaw-dropping, super stealthy carbon Tues models; Michael took the large £2,870 CF, with Rockshox Boxxer and Kage shock, whilst I took a new for 2017 XL sized, £3,380 CF Pro, equipped with Fox 40 and X2 shock. At 6’1″, the XL felt perfect.
I should add at this point, I have never ridden a downhill bike, so immediately I was impressed by the ultra plush seemingly endless travel… and that’s just taking the bike for a quick warm up around the green trail (possibly the most overkill bike for a green trail ever!).
The CF Pro is dripping with choice components. From the E*Thirteen LG1+ wheelset, cranks and cassette (7 speed, 9-21 ratio), the stealthy carbon frame (203mm front and 208mm rear travel), carbon Renthal fatbars and Integra 35 stem, this bike felt absolutely indestructible, whilst also being a thing of beauty. Impressively, the CF Tues weighs in at a very modest 35lbs too! Super slack angles, 650b wheels (we’re still waiting to see if 29″ DH is the next big thing… roll on Fort Bill) ensured that the bike is planted, grippy and railed. All in all, quality kit, quality looks and all at a quality price.
Measurements wise, the XL has a top tube of 647mm with a reach of 470mm. Chainstays remain the same across the size range at 435mm, as does the head angle at an ultra slack 63.5 deg. With a wheelbase of 1258mm, it’s around 60mm longer than my Aeris, so nothing too drastic which helped me adjust to the bike very quickly.
Although the bike was light for what it is, it’s hardly the right bike to ride uphill (duhhhh…). Conveniently however, Tristan had hired a Toyota Hilux for the weekend… so, Michael and I hopped in the back and were treated to a VIP experience; Swinley Forests inaugural shuttle service!
It was a bit of a surreal experience, getting driven to the top of a trail in style – Michael ran a live Facebook video to document the experience, which was a great laugh!
We got to the top of Blue 14 and tried a couple of runs on the DH monsters. Simply put… they flew. I know this trail very well and feel I know every bump, rut and hole. On the Tues, it was like riding on an F1 track.. buttery smooth once again, but great fun too! After a few runs of the trail, we headed to the woods to mess about on a hidden drop, which has a few lines of varying size. Here’s a little clip of Michael and I doing what I think may be my biggest drop to date:
I was stoked to have hit that line, as I love the feeling you get when you know you’re progressing. Big thanks to Michael too for the encouragement. We headed back after a brilliant little session on the Tues models for a burger and a catch up. All in all, a top day, even if the queues were rather long, which did leave a few hopeful testers a little frustrated.
The Tues feels like an insane bike and something I would love to own. However, it is absolutely overkill for anything I am likely to ride for now, although would be a good laugh at places like Bike Park Wales or Forest of Dean. I’ll admit, I am still tempted by a downhill bike to add to the stable though, and I don’t think I’d go wrong with a Tues CF. After all, if it’s good enough for Aaron Gwin, surely it’s good enough for little old me! Again, it’s a thing of beauty to look at, especially in the gloriously stealthy Pro guise, with full black everything! Perfect for Stealth Riders worldwide!
Whilst I was disappointed with not being able to ride the Jeffsy models and the Capra, overall, the Rolling Circus was a great event. Tris and the team ensured it was superbly organised and the YT guys were awesome, helping with any queries, getting you set up on the demo bikes and also offering out some mega tasty beer (thanks to Kia at the hub, I got to sample a fair few of these!).
The tireless efforts that the team, shop staff and ambassadors put in to ensure everybody has a good time is, at times, unreal. They always manage to take a huge event and make it incredibly personal, as though you’re one of the team or an old mate catching up for a chat. It’s hard to explain, but their ethos is about getting rad. You don’t have to be the best or the fastest, you just need to have a great time. That is Swinley summed up.
Back to the bike quickly, the YT Tues is a formidable bit of kit, capable of much more than I am. However, if you like your trails rocky as fook, rutted to hell and steep as a cliffside, this is absolutely the bike for you. I hate the term, but the ‘cockpit’ looks sooooo nice too. The little touches such as the placement of graphics helps remind you that you’re riding a world class downhill bike, guaranteed to leave you smiling for hours after every single ride.
It’s no wonder YT are gaining more and more market dominance year on year. Their formula of producing killer looking, flawlessly performing bikes and matching them with some of the best riders in the world is working very well and YT bikes are becoming the machine of choice for a massive amount of riders globally. The Rolling Circus has only just begun, so by the time they’ve finished the world tour, there will no doubt be thousands of happy new members of the YT Mob, ready to shred their local trails with a massive grin.
YT, and Swinley, thank you for having me and treating me like a VIP on the day. I felt truly humbled and incredibly grateful, you’re all amazing. I’ll sum the event up by stealing YT’s tagline: GOOD TIMES.
Open face breathability. Full face protection. This is the tagline from Fox for their new Proframe helmet, launched recently. It’s hard to think that a full face lid would be anything other than a sweatbox for all day riding, so I wanted to try one out to see if that tagline rang true.
Sunday 23rd April 2017 saw the Fox Europe team embark on Swinley Forest, one of my local trail centres, on their Proframe World Tour. This was the perfect opportunity for riders like me to try out the new helmet and see what the fuss was about. Even better, they had Pierre-Edouard Ferry (Red Bull Rampage sender and damn nice guy) leading out rides, Russ Cosh from the Swinley Hub cooking up some mean burgers, the awesome Stuart, Joe and the team from Fox and the lovely Rachel (Stuarts other half), in attendance.
Before I go any further, go follow Rachel on Instagramfor all things Fox, MTB for chicks and brilliant posts. Top marks too, to Tristan, owner of Swinley Bike Hub, for once again putting on a great event. The Swinley Enduro, the BBQ’s, night rides and all other events are always a brilliant laugh, check one out if you can!
I had a chat with the guys and picked up a Proframe in Medium in Moth Teal and the fit was perfect, like Goldilocks tucking into a bears porridge. If it’s not the right fit for you immediately, the helmet comes with a number of different cheek pads to get sizing just right.
I set off on a small solo ride to get some first thoughts and take some photos and WOW. I felt like I wasn’t wearing a helmet on the first trail, and the climb on the second trail usually has me warm in my current helmet (Bell Super 2R, which I usually run without the chin guard), but the Proframe kept me feeling fresh as a daisy.
It probably helps that the visor is fixed to allow for maximum airflow, but more on tech later.
Heading down blue 3 with the wind rushing through my hair and beard (the Proframe has a massive beard vent at the front…), I saw a mate of mine, Marius, taking photos so stopped for a chat and to get a banger shot – cheers Marius!
After some more climbs (helter skelter, if you know Swinley), my head was still cool thanks to the 15 big bore intake vents and 9 exhaust vents placed perfectly across the helmet. After a few miles at a reasonable pace, my head was dry and I headed back to the trailhead to catch up with everybody and talk tech with Stuart, Country Manager for Fox GB. So, let me pass that tech talk to you.
Firstly, the Proframe comes in 8 colours, so there’s guaranteed to be one to suit you. Of course, I’d go with black, but after wearing the ‘Moth Teal’ colourway, I actually really liked it (just don’t tell anybody, ok)! Even with its ridiculously light weight (735 grams for the Medium), it’s fully downhill certified, so you could genuinely feel confident about taking on Fort William or Mont St Anne whilst rocking this lid. Even more so that it comes as standard with MIPS and also includes a ‘Varizorb’ liner, both of which help to spread the force of any impacts away from a central point on your head. Which is always nice.
One thing I was super impressed with, was the ‘Fidlock’ buckle; sometimes when wearing gloves, unbuckling your helmet can be a hassle. The Fidlock allows you to softly press a small button which releases the buckle in a split second. It’s just as easy to do up and, when buckled, it’s not going anywhere.. once again, keeping you feeling confident that the Proframe is going to keep you safe on the trails.
I don’t really do tech talk though, I prefer to focus on the feel on the trail and my personal thoughts, so here’s some more tech from the source and a promo vid:
It’s all fair and well going our for a solo mooch at a decent pace, but I met up with two of the Swinley Bike Hub race team; Michael Wilson and Aidan Burrill, both of whom are absolute weapons on a bike. So, I went for a proper little ride with them to get the sweat going. Even when trying to keep up with the big boys, I felt much cooler than if I was wearing my Super 2R, both in open and full face guises. Incredible stuff, Fox! Don’t get me wrong, I was still a sweaty mess at the end of the ride (damn my love of pizza), but a little less so I think, thanks to the Proframe.
Pricing is also very reasonable, considering the protection, weight, technology and looks (which, can I just say are stunning). At £215 rrp, it’s fantastic value in my opinion. Here’s a few shots to show the look of the Proframe both on and off the head:
Put simply, although I only tried this helmet for an hour or so, first impressions are verrrrryyyyy good. It allows you to climb like a goat and stay cool, yet smash the descents with the confidence of a ‘traditional’ downhill/full face helmet. Sometimes, trying to combine two things can go horribly wrong. Fox however, have created the PB&J of helmets; a delicious combination of open faced breathability, with the performance and confidence inspiring protection of a much heavier helmet.
Top marks for pushing the boundaries, I can see this being a huge hit on the trails across the globe. I’m actually in the market for a new helmet myself and this is now a serious contender. I’d love to have had a longer time demoing it, but I was short on time and to be able to even try before you buy is a wonderful thing!
Is it overkill for the trails you ride? I’d say no. It’s so light and there’s always the chance that even at your local trails you become complacent, so to be able to have the option to ride all day without overheating whilst knowing you’re protected is surely a win-win situation.
Available at all good Fox retailers, although I’d recommend you order yours through Swinley Bike Hub; it’s a great place and, considering Fox chose Swinley as a venue, surely that says a lot.
So if you follow the Stealth Riders Instagram, you’ll know I’ve been showing off something new with a little bit of sparkle on the stealth machine. I didn’t need any new decals as I’ve only just got my new RockShox Lyriks, but when Fox from South Coast Suspension shared a post from a company called Stickers – Decals – Graphics, it caught both my eye and attention.
Along with your standard replacement decals, SDG offer custom designs in some incredible colourways including a wide range of coloured glitter, oil slick chrome, rainbow, camo and many, many more. There was only one choice for me though, which was stealth black glitter.
I dropped SDG a message on Facebook at around lunchtime on a Wednesday a while back to see if I could get some custom decals for my fork and shock and Mike replied very quickly to say that custom decals weren’t an issue, nor were some stickers. We chatted for a bit and by Wednesday night at around 10.30pm, Mike had sent over a few designs and we agreed on one. Bosh, super speedy service!
Below are some of the rough drafts sent over to show placing and cut lines, so you get an idea of the process:
I paid Mike the next morning and by the Saturday I was in possession of my awesome new decals. Custom design, print and delivery in a matter of days is absolutely unreal, so I was massively impressed with this!
SDG don’t just do fork and shock decals, they offer a whole host of options including wheel and frame decals and 100% custom jobs too. They also offer a load of goodies outside of the MTB world, so be sure to check them out or get in touch for full information.
It’s worth mentioning that pricing is brilliant too. It’s best to get in touch with SDG directly for any custom quotes, but for a whole bunch of stickers, 2 sets of fork decals and some rear shock decals, I was very happy with what I paid.
The quality is fantastic – high grade black vinyl and a glossy laminate are standard (both gloss and matt options are available) and the glitter is smooth to the touch, one slight hesitation I had with ordering. Removing decals can be a pain, but I found it surprisingly easy and application was a piece of cake. Aesthetically, the glitter is subtle enough to go unnoticed in the black guise, but if you’re a colour lover and opt for something other than black, these will stand out in an incredibly good way. I like the subtlety though, as it invites people to take a closer look at the bike, creating a talking point (as you can tell, I like talking bike).
I was also interested in seeing the decals being created and cut, so Mike did me a solid and recorded the whole thing, including a few test runs of some standard stickers. The video is below, check it out if you like that kind of thing (raw sound included):
The final result in video form is below. I used low light and my camera phone to give an idea of how they’d look on a night ride (and also how they’d react to light):
Do the decals make me faster? Nah, but justLOOK AT THEM. Mike has managed to get the Stealth Riders logo into the fork decals and rear shock decal which is incredible. They shimmer in the sun and sparkle at night and yes, I’m starting to sound like I should have my own Disney movie but whatever. Some of my trail buddies have started calling me princess since I fitted them, but I think they look super cool and add a touch of individuality to a bike. Hell, I’m stoked to be the #glitterbitch of the trails.
A few close ups:
Point is, they look awesome and if you’re looking for something a little different, get in touch with SDG today and see what magic they can work for you. This may have been the first thing I ordered from SDG, it most definitely won’t be the last. Although it’s a picture heavy blog post, even this many photos don’t do the real thing justice. Take a punt, give them a shout and see how good they are for yourself.
You’re the same as me I reckon. You’re always looking for the latest upgrade to your bike that’ll make you radder than Danny Hart, gnarlier than Kurt Sorge or rowdier than Olly Wilkins. You spend hours researching the latest tech, suspension models, wide rims and weight saving options. However, something that is often overlooked is one of the things that keeps your eyes on the prize. Goggles or glasses are important, but what really matters is a top-notch mudguard to keep the mud, dog eggs and other trail terrors at bay.
There are many mudguards available and I’ve been through a few, but for the last few years, I’ve been running a Mudhugger in one form or another. Initially I opted for the FR, the longer length guard that offers additional protection from the elements. However, more recently, mostly due to me throwing my bike in the back of the car and warping my FR version, I decided to slim down and try out their original guard, the Shorty; a ‘diet’ version in the Mudhugger range these days.
First up, the feel of the Mudhugger guards is solid. Although malleable, they feel a lot sturdier in comparison to other guards I’ve tried out. Thicker than your average guard and offering extra coverage, I’ve actually ditched wearing eye protection since fitting a Mudhugger (except for uplift days ‘cos you gotta look Enduro in ya gogs, brah).
A bit about the company. The Mudhugger is owned and operated by brothers Bruce and Jamie Gardiner who are top blokes and also happen to ride the same bike as me, the awesome Bird Cycleworks Aeris. In 2012, they were fed up of mud caked arses and brown eyes (erm..), so they got to work. Fast forward to today and they have a product that graces bikes of World Champions such as Loic Bruni and many other pro riders. Offering up 9 different types of hugger, plus a host of other goodies (air fresheners, helitape, neck warmers and much more), there’s a hugger to suit every bike. From boost to fatties and leftys, they’ve got you (and your eyes) covered. Check out their site right here.
Back to the Shorty in question. It comes with enough zipties to get you fitted (you may opt to double up the ties on the lower legs to keep it from moving if, like me, you remove your front wheel to put your bike in your car) and is ridiculously easy to fit. If you do need help, they’ve even made a sweet video to help you:
It’s impressive in weight at just 60g and measures 340mm in length, so is super light yet sturdy and offers exceptional coverage to boot. The Shorty also caters to all standard wheel sizes (whatever the hell ‘standard’ is these days), fitting 26″, 27.5″ and 29″ wheels. It sits close to the tyre (I run a 2.3″ Maxxis Shorty), but not close enough to cause any concern. Occasionally a small bit of debris may get caught up, leaving you with a ‘moto’ sounding tyre, but a quick bunny hop sorts that out. A lower profile tyre would alleviate this issue though.
On the trails, the Shorty doesn’t interfere with your riding and is barely noticeable except for the looks; I personally feel it adds an extra bit of spark to the bike thanks to the curvy shape, rather than others that I feel are a bit pointy and jagged.
Riding the trails of the UK, I’m regularly exposed to bad weather and the subsequent slopfest under tyre, so keeping things away from my face when nailing a trail at 20-30mph is essential. The Mudhugger Shorty has excelled at this time and time again. So much so, I keep mine on year round as you always run the risk of a damp spot under tree cover. It’s honestly incredible and the only time I’ve had mud in my eyes (remember I don’t ride with sunnies or goggles 90% of the time), is when I’ve hit a corner and the front wheel has been at an awkward angle. Still, one time from a hundred is absolutely good enough for me!
To sum it up, I genuinely cannot see me changing to any other form of mudguard in the future. The only time I’ll consider it is, if the Mudhugger bring out something better… but that’s a challenge in itself, as, like a Sunday roast or a cold beer, it’s hard to improve on perfection. Bottom line – get one, your eyeballs will thank you.
At just £18 with free delivery, it’s a steal and a surefire way to improve your riding on a budget. After all, the better you can see, the faster you can go, right? Words are great, but a picture paints a thousand of them:
To many in the South of England and further afield, he’s a man that needs no introduction. Husband, father, racer, builder, and organiser. This is a man that has taken the Enduro scene by storm, creating the epic series that is the Southern Enduro.
I had the pleasure of sitting down with Scott Fitzgerald recently to have a quick chat about all things Enduro. Like his namesake, he’s written a fantastic story so far and the future is looking bright for both him and the Enduro scene. With the departure of the BES in 2017, local ‘grass roots’ events look to be taking the lead and setting a precedent for what a race series should be; competitive but with a familiar, friendly vibe.
I only met Scott last year, answering his call for volunteers to help shape one of the courses for the 2016 series. Milland in Sussex was the venue for both the first and last round and it was unbelievably good fun; the rain had brought the mud to race day, but in certain sections, Milland was also reminiscent of the ‘brownpow’ segment in the amazing film UnReal. Since then, he’s become a good mate, so a catch up was very much welcome.
So Scott, howdid you get into organising the fantastic Southern Enduro series? It all started racing the fantastic UKGE races. Then, in 2013 the QECP Enduro was born. In 2014 I added the QECP day and night Enduro. In 2015, riders were asking for more races, the obvious choice was a series and the Southern Enduro was born.
What’s your best memory from the 2016 series?
It was actually digging at the Milland venue! It’s still hard to believe that we built 4 stages from scratch in 7 months, absolute madness and what a venue it was!
With the 2017 series kicking off in June, which round are you most looking forward to?
The two new venues! I have fond memories of racing DH at Okeford hill bike park (the old UKBP) on my Dialled Holeshot hardtail. Then Pippingford Park; this venue has massive potential and in the future, who know, it could make a great 2 dayer Enduro.
What makes the Southern Enduro stand out from the competition? I would say the at atmosphere. The Southern Enduro team all race Enduro too. You can tell, we all love it!
If it’s somebody’s first Enduro, what advice would you offer?
Get in the fun category and enjoy your day. There’s no pressure in the fun category, you’re all in the same boat. Make some buddies and give it your best.
Any insider info you can give racers for any of the upcoming rounds?
Yep! Okeford bike park – go on a uplift day there, is cheap as chips and a really good service. Ride every trail there 🙂
Also, get signed up for the Southern Enduro Champs! It honestly is one of the best places I have ridden in the UK!
Who can we expect to see supporting the 2017 series?
Transition Bikes, they have been a great headline sponsor for the series. You can also expect to see Bird Cycleworks, D&D cycles, Sussed out Suspension, Solent Cycles, Airport Autos and Pedal Addiction. On top of that, some great food and a well-deserved pint will be available at the venues.
How about you, where will we see you and the QECP Team racing in 2017?
We will be racing lots of Enduros in the UK, some in France and the local DH races from Gravity Project.
When you’re not organising races, where can we find you on the bike?
Mainly QECP digging and riding. I also have a soft spot for Hindhead, the trails there are insanely good fun.
What’s your favourite pre and post ride fuel?
Water and granola for pre-race. For post-race, I really shouldn’t say beer, but beer.
I’ll certainly drink to that! Massive thanks to Scott for taking the time out to have a chinwag. If you’re interested, you can check out the Southern Enduro site here. The 2 day champs event is set to take place in April with very few remaining spaces left, so sign up hereand get involved!
As a taster in addition to the above, here’s the man himself talking through the 2017 series:
All photos are courtesy of Big Mac Photography, who (along with many other great photographers) will be ever present at the series, taking outstanding photos. Don’t worry; if you ride as badly as me, this is a man that can make you look good!
I’ll be at the Southern Enduro in some form, whether it’s racing or marshalling (or chatting shit trailside to Scott and the series sponsors), so be sure to say hi, or listen out for some shouts of encouragement!
So I recently tested the new Bird Aeris One20 and the review is here. Once I handed that back, I was given the bigger, burlier brother, the One45 and went to the Surrey Hills to put it through its paces. Simply put, at the end of the day, I didn’t want to give this bike back.
Before I get too carried away, let’s talk about the bike. At 6’1” and 87kg, I currently ride a large original (now retro?) Aeris, but opted for the ML (medium long) version of the new bike. The reason for this is due to an increased top tube length (630mm) and wheelbase (1230mm), effectively sitting me in a similar position to my current ride. Measurements are below, these can also be found on the Bird website:
The demo bike came with 150mm RockShox Yari forks and a metric Deluxe RT3 shock with 145mm travel. I ran the suspension at 30% and 20% sag respectively, opting for a slightly stiffer rear for the terrain I was heading to. Like the One20, it was equipped with SRAM GX 1×11 drivetrain and guide r brakes. The wheels were slightly wider DT Swiss M1700’s, with the same Maxxis DHF/HR2 combo I tried the day before. This time though, I ran the rear at 23psi and the front at 20psi. Again, a mighty Mudhugger Shorty was on standby to keep any mud and slop from my face.
The weight was around 30lbs, so a like for like with my current bike and this was evident the second I sat on the bike; I felt instantly at ease with it. The bike has been totally redesigned around metric sizing and boost spacing, but it felt familiar, which is a huge plus when you only have a day to form an opinion!
It was another cold Winters day, so the ground was frozen with some iced over areas to contend with. I set out and after what is usually a brutal climb out of the Walking Bottom car park up a super steep 13-15% incline, I still had air in my lungs; this bike genuinely climbs like a hardtail with zero feeling of pedal bob… from then, I knew it was going to be a fun day out. I hit Proper Bo to get the measure of the bike and the power was instant. Snaking through the small turns and ruts, the small double and drop on this trail felt like nothing.
Due to it’s steep seat tube angle (440mm), the One45 felt long and slack when attacking the descents but put the saddle up for a killer climb and it shortens up, allowing you to really put the power down and stomp uphill in record time. It’s like Optimus Prime’s wet dream, a transformer of epic proportions.
I figured it was time to try a bigger trail. Thick & Creamy on Pitch Hill had a hold over me this time last year with its 2 sizeable drops and a crazily steep, tight chute as the entrance. I’d nailed it a few months back, but on the One45, I breezed through and it genuinely made the drops there feel like I was hopping off a kerb. The landings were so smooth and the bike soaked up everything with more to give. Granted it’s not carbon, but when the One45 is released in March with its ultra-stiff chassis and tidy design (and bottle cage mounts!), it may have Nomads and Capras squirming a little uncomfortably in their seats.
Thick & Creamy done, I gave Thicker & Creamier a go next. Another crazy steep entrance gives way to loamy turns and fast bombholes. However, there was a monster puddle in one of these, which I tried riding around, only to eat dirt. After a nice soft landing and a little chuckle to myself, I was back up and finished the end of the run with its nice step up before leading out to the road and a nice climb back to the top.
The Surrey Hills is great, too, with an abundance of trails and friendly riders. I bumped into a film crew from Fly Creative and a guy called Phil, chatted to them for a while, then saw Joe Williams of Physio 1 to 1. Check him out here if you’re in need of a top class physio! Here’s a couple of close ups:
Taking so many pictures, riding like a bat out of hell and laughing like a mental case made me hungry, so I set my sights for the Peaslake village store, via the renovated Captain Clunk. When I say renovated, I mean ruined. It’s been tamed down massively and wasn’t anywhere near as challenging as it once was. A huge shame, but there’s still a vast network of trails to keep every level of rider entertained.
Whilst I was tucking into a red velvet cupcake and slurping coffee to refuel courtesy of the ever lovely ladies at the store, a few Trek staffers rocked up on some of their 2017 demo models, so we had a chat about the Aeris and their Remedy and EX models before I set off for round 2 and my old favourites on Holmbury Hill; Yoghurt Pots and Barry knows best.
Consistently, the One45 climbed like a trooper, making light work of the Radnor Road climb. With sore legs, I hammered through Yoghurts as best as I could and then flew down BKB as if I had sprouted wings. I did pick up some PR’s earlier in the day (including climbs), which is testament to the bike. The Surrey Hills is a place I’ve been riding for so long and riding this bike breathed new life into very familiar trails, rejuvenating my love for some that had become a little stale over the years.
Massive thanks to Bird for the demo. The One45 drops in March and you can pre-order yours here. As with the One20, a huge range of sizing and a fully custom bike builder means there will be an Aeris One45 for you. Colours are delightful too; lime green, the tangerine orange model I tested and my favourite of course; stealth black. Frame prices start from a wallet friendly £900, so this is set to be another outstanding value for money machine.
I absolutely love my current Aeris and I’m sure it’ll go on for a long time yet. However, when it’s time to change, the One45 will be at the top of my list. The One20 is superb, but from the second I slung my leg over the One45, I felt at home; one with nature and metal, with nothing but zen thoughts of shredding epic trails in my mind.
I’ve been trying to pick out a flaw or a negative point, but after sleeping on it, I honestly have nothing bad to say about this bike. To sum it up, imagine if you will, that Hercules and Icarus had a baby. Their lovechild would be an Aeris One45. Immensely strong, stiff and solid, yet light as a feather when climbing and faster than me at an all you can eat buffet.
It’s a most welcome addition to their line up and is simply an outstanding successor to the Mk1 and Mk1.5 Aeris models.
The Aeris is dead; long live the Aeris.
Ian @ Stealth Riders
Note – This is my own review and all opinions are mine. I was not paid or asked to do this, I just wanted to share my views in the hope it may help you out if you’re in the market for a new bike. The ride I did can be seen on Relive right here. I’ve also included a video full of sketchy riding, crap angles and a little stack from my day out:
My day job is in travel and January is always manic, so I decided to book 2 days off and ride bikes instead. Rather than ride mine, I thought I’d give the new Bird Aeris models a go and pop some first impressions up to help people that may be looking for a new bike.
Bird have redesigned their full suspension Aeris and now have 2 more curvy models based around metric shocks and boost spacing; the One20 and the One45.
I gave the guys at Bird a shout and before I knew it, I was picking up the new Aeris One20, Birds newly designed 130/120mm trail bike and was en-route to Swinley Forest, which I figured would make an excellent testing ground for a bike with this amount of travel. It was a damn cold but sunny day, sitting around minus one, so the ground was crisp with some damp spots on the more loamy sections. A perfect day to spend outside, rather than confined to an office. If you’ve not been to Swinley Forest yet, I’d highly recommend it for it’s all weather friendly trails and the laughs you’ll have at the hub with the team there.
The model I tested was a large, which at 6’1”, was spot on. Kitted out with 130mm RockShox Pikes, their new metric Deluxe RT3 rear shock, SRAM GX 11 speed drive and Guide RS brakes and DT Swiss E1900 wheels with Maxxis Minion DHF front, High Roller 2 rear both running low pressures of around 18psi. Keeping the muck away is the ever reliable Mudhugger shorty. It was a setup similar to my current bike, except the new models now sport bottle cage mounts, making them super enduro!
My initial thought was that the weight was very low for an aluminium bike. I didn’t weigh it with scales, but was impressed with both that and the sleek new curves and frame design in general. Heading through the high sided berms of the blue runs at Swinley, immediately I could feel the bike gripping in the cold, icy conditions too. At times, it felt like I could get practically horizontal and still go lower.
The bike is also long. Very long, with a top tube of 655mm on the large, offering a wheelbase of 1220mm! However, thanks to a steep seat tube, during the climbs it also felt compact which worked in my favour… it’s hard to explain, but it just works. You can check out the full measurementsbelow:
What impressed me most however, is when I got to the red sections and off piste areas. I figured I’d hit a few drops that I’d not usually attempt on a short travel bike, but it ate them up with ease. It’s a bike that definitely punches above its weight in terms of gravity riding; I didn’t feel like I had 120mm travel, that’s for sure. As somebody that can’t jump for shit, it also inspires confidence and after a few attempts, I was clearing the table on Babymaker like a (not so) pro.
The metric shock may have something to do with this. It felt a lot smoother and more progressive than my Monarch RT3 Debonair. Technical data isn’t my strong point, but I’m sure the Bird guys would be happy to explain ramp up and linear feels! A few close ups for you:
Like a chainsaw or a scalpel, in the hands of the right person, this is one seriously fun piece of kit and I reckon it’s going to be a sure-fire hit. It’s a bike that is made for the likes of Swinley Forest, but I’m sure people with more talent than me will slay the black runs of Bike Park Wales on one of these! It’s already got a race winning pedigree too; Chris Doney rode one to victory in the Southern Enduro last year.
Its main competition in terms of UK brands will be the Whyte T-130 and the Cotic Flare, neither of which I’ve had the chance to try yet… I’ll look into that soon.
If you’re looking for a really fun trail bike at a great price, the Aeris One20 should definitely be on your demo list. There’s a huge amount of sizing, including a ‘medium long’, as well as a fully custom bike builder, so there will be one to suit you for sure. Prices start from an incredible £1681 and you can choose from Atomic Blue, Candy Orange or Tungsten Grey.
Check out the full range, sizing and pricing here.
To sum it up, at the end of the day when dropping it off at Bird HQ, my legs were aching from pushing myself and climbing faster than ever before and I had a big smile from an epic day out on a stunning bike. It feels superb going up and descending and has a huge grin factor. I do think I’m personally more suited to a larger travel bike, having had a 160/140 Aeris for a while now, but the One20 is a bike that absolutely has its place in the market as a short travel trail destroyer.
However, although sad to give the One20 back, I was handed a One45 and had a date with the Surrey Hills the following day… you can read that review here.
Big thanks to the guys at Bird HQ for the demo bike and to Swinley Forest (and the ever awesome hubdudes) for the fantastic test ground.
Peace out for now,
Ian @ Stealth Riders
Note – This is my own review and all opinions are mine. I was not paid or asked to do this, I just wanted to share my views in the hope it may help you out if you’re in the market for a new bike. The ride I did can be seen on Relive right here.